Architecture

You are currently browsing the archive for the Architecture category.

Mid Century Modern Addition / Remodel

December 23, 2011 in Architecture, CAST Projects by Stefan Hampden | 1 comment

This remodel and addition to a classic Tucker & Shield Mid Century Modern home in the Laurelhurst neighborhood of Seattle, strengthens the connection of rooms to one another, the public portions of the house to the site, and updates the finishes of this 1955 residence while staying true to the spirit of the original design.

new kitchen opened to dining room

A new day lit stair well creates a logical circulation path between the bedroom wing of the split-level, and the public spaces of the house, creating a more fluid transition to the second floor living.  The new family room addition builds off the home’s original elemental language of brick, wood and glass, providing a deck to take in the expansive views of Lake Washington – Leveraging the house’s connection to a quintessential Seattle site.

A special thanks to the project manager Rich Denny of High Country Contractors for being a great partner on this project!

entry and new stairs

Read the rest of this entry »

Saratoga Residence

December 9, 2011 in Architecture, CAST Projects by Matt Hutchins | No comments

Saratoga Modern–exterior from backyard

Set in the Saratoga, California suburbs, this house is a complete reboot of a 1969 faux colonial.  We’re stripping away the historical pastiche, and focusing the design on nearly seamless indoor/outdoor living.  Wrapping the house is a stone terrace and arcade which defines a new dining space, lounge area and a series of gardens.  It screens the intense solar exposure, and reinforces the horizontal in keeping with the City’s very restrictive planning regulations.

Seamless transition from terrace dining space to new kitchen, with indirect lighting in skylight slot to wash the cabinet wall

The palette of natural materials is pretty rich, but understated, using changes in texture and shadow.  We’ll be using a light colored, hard limestone, called Fiore from Maidenstone.  We’ll use a split face texture for the arcade columns, hammered tile for the outdoor terrace, and a brushed finish for the interior tile.  The cabinetry and trim will be mostly walnut slab and panels.

The slot skylight washes the walnut cabinet wall in light. The new staircase is a fun mix of limestone, glass and steel.

More information and photos after the jump…

Read the rest of this entry »

Urban Olympic reboot

November 11, 2011 in Architecture, CAST Projects, Passive House, Sustainability by Matt Hutchins | No comments

Street view

We’ve been investigating what the Urban Olympic project would look like as an 27 unit apartment building.  One potentially excited twist on the building is that we have split the bulk into two volumes with a 18′ wide courtyard atrium.  The atrium and circulation are exterior, so we can apply another 2000 S.F.for an extra 3 units and still come in under the FAR limit.

We also did a first run at some energy modeling, using Archicad’s EcoDesigner program, and feel that given the bulk it would be fairly straight forward to achieve the Passive House standard, but the return on investment is better if we design to the envelop to Washington State Energy Code, add solar hot water, switch the lighting to LEDs, and add an ERV.

 

Canal Street Studio Ground Breaking

October 24, 2011 in Architecture, CAST Projects by Stefan Hampden | No comments

Dave Boone has broke ground on our latest commercial project, The Canal Street Studio. This mixed use building on an infill lot in the Fremont neighborhood of Seattle, will house retail and office space, an artist’s studio, and a caretakers residence. This live work studio for an interior designer/ceramicist and a writer, over looks the Fremont Canal, and is projected to be finished in spring of 2012.

WEST SEATTLE PREFAB

September 9, 2011 in Architecture, CAST Projects by Tim Hammer | No comments

A short subdivison in West Seattle is serving as the site for two prefabricated homes for a Seattle developer.

CAST worked with a modular factory in Oregon to understand the constraints involved with building, shipping, and installing factory built structures. Leveraging this knowledge we have designed a prototype house which balances the economy of modular construction with selective site built elements to gain the modulation, character, and function which stock prefabricated construction typically lacks.

By making changes to the homes orientation, location of site built portions of the structure such as awnings, eaves, parking, and decks, an extremely economical structure is tailored into a series of custom homes.

SOUTH SEATTLE BACKYARD COTTAGE NEARING COMPLETION

August 12, 2011 in Architecture, Backyard Cottages, CAST Projects by Tim Hammer | No comments

This new home was permitted under Seattle’s citywide backyard cottage ordinance (which is rapidly approaching it’s second year anniversary). The existing home, with a large corner lot and alley access, was an ideal candidate for a backyard cottage. The site allowed both the existing home and new cottage to enter from separate streets, have separate outdoor living areas and maintain a great deal of privacy from one another.

The owner desired a modestly scaled 800 square foot structure with exterior massing that followed the traditional lines of the existing home and a modern, light filled interior that opened to a private courtyard and was suitable for entertaining guests. The floor plan centers on a double height dining room with clerestory windows, sleeping loft and a large 4 panel door that frames views of the private courtyard and terraced garden. The cottage features radiant floor heating, an efficient on boiler with integrated solar hot water collection and a 1500 gallon cistern for rainwater catchment.

The homeowner served as the general contractor and invested considerable sweat equity which allowed the total project cost to come in at just under $100,000 ( ! ).

View from the dining room into the kitchen.

1,500 gallon cistern for rainwater catchment.

View from the kitchen into the dining room and living room.

Backyard Cottage Tour

May 24, 2011 in Architecture, Backyard Cottages, CAST Projects, Events, Press by Matt Hutchins | No comments

June 12, 2011
11:00 amto3:00 pm
July 17, 2011
12:00 pmto3:00 pm

cottage interior

The Widner Cottage is going to be open to the public twice this summer for tours:

First, the Phinney Neighborhood Association’s Home and Garden Tour will roll through on June 12th, from 11-4 pm (see link).

Second, the Cottage will be featured as the AIA Seattle’s Open House on July 17th from noon to 3 pm.  More information here.  As part of the tour, the house will be published in Seattle Magazine, in the Northwest Home section in July.

tansu cabinet stairs

Alternate views of the Passive House conference in Olympia, March 18

March 20, 2011 in Architecture, Passive House, Sustainability by Matt Hutchins | No comments

Stefan and I attended a conference put on by Passive House Northwest at Evergreen State College on Friday and I feel like we got a bit more of the nuance of the standard, understanding of more of the nerdy building science, as well as a chance to look at first hand some of new projects being brought to the US market.

A little more background: Passive House is a concept developed by the PassiveHaus Institute in Germany.  They developed the tools that are used to model performance, and do the training and certification of Passive House consultants.  While there are about 30,000 PH projects worldwide, the US rollout has led to a few complications. Read the rest of this entry »

On the Boards: Urban Olympic Passive House

March 11, 2011 in Architecture, CAST Projects, Passive House, Sustainability by Matt Hutchins | 10 comments

Urban Olympic multifamily Passive House

Urban Olympic multifamily Passive House

Urban Olympic is a community of 9 townhouses, and will  mark a couple of firsts for us:  our first Passive House project and also our first project under the new Seattle multifamily code.

Passive House is a rigorous green building standard focused on exclusively on energy consumption, energy efficiency and air quality. They are super insulated, almost airtight, and therefore need very little energy input to heat (up to a 90% reduction of the energy used by a typical code compliant house).  The heat from equipment, people and lighting retained within the insulated building envelope essentially replaces the furnace/boiler as the primary heat source. Fresh air is conditioned through a Heat Recovery Ventilator (HRV) with the exhausted air.  Although solar gain does factor into the equation, Passive Houses are not passive solar houses.

Urban Olympic, to my knowledge, will be the first multifamily Passive House in the United States.

Download from the Pro Bono Panel discussion

February 2, 2011 in Architecture, Pro Bono Publica by Matt Hutchins | No comments


Alki Beach Park--Statue of Liberty Plaza--pro bono project completed in 2009

Alki Beach Park--Statue of Liberty Plaza--pro bono project completed in 2009

We had about 15 at the AIA/CORA Pro Bono Design panel discussion.  Joining me on the panel was Rachel Minnery from Environmental Works, and Geoff Piper from Global Studio.

A couple of valuable points that came out of our discussion:

1.  Pro bono work is different than being a volunteer.   Pro bono service is the application of our professional abilities, judgement, experience, creativity to work for the public good.  Volunteering is a valuable component of civic life, such as working for Habitat for Humanity, but is probably relatively unskilled labor.

2.  Vet potential clients–they need to have the community connection, stability, and personnel to carry out the mission, because our work as architects is really just the beginning for any pro bono project. Our work may be the seed, but it takes a committed organization to make the investment a reality.

3.  Treat pro bono projects just as you would any other project in the office.  Otherwise, you’re doing both your client and our profession a disservice by treating it as a less than serious undertaking.  That means contracts, liability, life safety, and solid construction documents.

4.  Work on projects/issues that you are interested in.  First it will help make the commitment easier to make, help you build experience in that area, and help to show people (and potential clients) where your heart lays.

As architects, we’re often not in the driver’s seat with regards to the project, but with pro bono, you have to take up the mantle of a shared mission with that community group or cause, and part of the compensation for your investment in time is taking the project where you think it should go.  Your vision may be underrated in the private sector, but essential to many non-profits trying to raise funds.  It is a wonderful opportunity to be entrepreneurial,  make connections with a larger community, and act not only as problem solvers, but problem identifiers.

« Older entries